habe eine Anleitung im I-Net aufgestöbert, um das lästige Hupen und Anlasserbetätigen beim scharfen einschlagen des Lenkers zu vermeiden.
Ist leider von einer Seite aus den USA.
Hier der englische Text:<hr>
No-Beep
If you use a tank bag, have you ever been embarassed by the horn honking when you make a sharp left turn? Here's what I did to prevent that.
I fabricated some aluminum brackets from 1/8" thick stock strap 2" wide and 3" long. I removed material to make an "L" shape with each leg 5/8" wide. I drilled a hole for mounting it, and bent it as the pictures show. All corners and edges were carefully radiused for safety.
I went ahead and made a pair for symmetry. Now, no more beeps! This was one of the first farkles I made when I bought my bike in 1996.
Note: If your bike doesn't have raised handlebars, the guards might hit the top shelter at full steering lock. Perhaps the design can be revised to provide clearance.
Here's a sketch and some photos:
No-Beep
If you use a tank bag, have you ever been embarassed by the horn honking when you make a sharp left turn? Here's what I did to prevent that.
I fabricated some aluminum brackets from 1/8" thick stock strap 2" wide and 3" long. I removed material to make an "L" shape with each leg 5/8" wide. I drilled a hole for mounting it, and bent it as the pictures show. All corners and edges were carefully radiused for safety.
I went ahead and made a pair for symmetry. Now, no more beeps! This was one of the first farkles I made when I bought my bike in 1996.
Note: If your bike doesn't have raised handlebars, the guards might hit the top shelter at full steering lock. Perhaps the design can be revised to provide clearance.
Here's a sketch and some photos:
<hr>
Vielleicht hat ja mal einer Lust, den Text ins Deutsche zu übersetzen.
Gruß Uwe